Northern Air HVLS fan – installation

This guide must be read and fully understood before installing or operating the Nordicco HVLS fan. Incorrect installation or use may result in serious personal injury or damage to property, equipment or inventory.

Installation and electrical work must only be carried out by qualified professionals familiar with applicable standards and safety regulations. It is the installer's responsibility to ensure full compliance with all local laws, regulations and building codes.

The product is for indoor use only. It must not be used in hazardous or explosive atmospheres. For installation methods not included in the manual, consult a structural engineer.

To reduce the risk of fire, electric shock or personal injury:

1. Use the system only as instructed by the manufacturer. If you have any questions, contact Nordicco A/S or its representatives.
2. Before servicing or cleaning, turn off the power to the control unit and disconnect it from the mains, so the power cannot be turned on accidentally.
3. Installation work and electrical wiring must be performed by qualified professionals in accordance with all applicable standards and regulations.
4. Do not allow water or solvents to enter the motor or drive. Under no circumstances may the motor or drive be sprayed with steam, water or solvents.
5. Install a repair/safety switch between each fan and the supply network. Do not place it directly above the blades, so it is always accessible – even when the fan is running.

Always turn off the power supply when working near or above the fan or the air blades.